Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Calabasas
If you live in Calabasas and your chimney cap has rusted through, blown loose in a windstorm, or your crown is crumbling down the sides of the stack, we can help. We install, replace and repair chimney caps and crowns throughout Calabasas and understand what this valley’s wind and heat do to a masonry chimney. Call (855) 337-1817 and we’ll set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Calabasas Homeowners Call Chimney Sweep West Hills for Chimney Cap & Crown
Calabasas homeowners tend to call us because the cap and crown work is tied to something bigger: the chimney as a whole. We don’t stop at the sweep. From the annual inspection to a crown rebuild to a full liner restoration, one company carries the job from diagnosis through repair. That matters in a town where a loose cap or a cracked crown usually points to a longer list of issues inside the flue.
Our technicians have up to 9 years of experience and work with the same professional-grade materials chimney specialists specify. When we set a cap or rebuild a crown, we use products we know will hold up to a Calabasas summer followed by a burn season. We’re also comfortable with the local housing mix: 1960s and 70s ranch homes on the flatter sections with original clay-tile liners, and 1980s to 2000s custom estates in the hills with multiple masonry fireplaces and oversized caps. Both need different answers.
We know the neighborhoods off Mulholland and Valmar, the hillside streets where the Santa Ana wind does its worst, and the older flat sections where crowns have simply aged out. Serving Calabasas means understanding that wind here isn’t just weather; it’s part of how a chimney performs. That local knowledge is why we look at draft and cap geometry first, not just the cap itself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Calabasas
Caps and crowns are what protect the flue after every cleaning. Here’s what we handle across Calabasas.
Cap Installation
A properly sized cap keeps rain, animals and debris out of the flue while letting smoke out and sparks in check. In Calabasas, spark arrestor screening isn’t a luxury; with the wildfire exposure here, embers leaving the stack are a real concern. We match the cap to the flue count and crown dimensions rather than dropping on a stock unit that fits loosely.
Cap Replacement
Most caps fail at the seams and mounting legs, and a cap that’s shifted or rusted through stops doing its job. On hillside estate chimneys, we often find original caps that were too small for the flue opening or never sealed to the crown, which lets wind-driven rain in and lets downdrafts soot the firebox glass. We remove the old unit and set a replacement that seals tight to the crown.
Crown Repair
The crown is the concrete or mortar cap at the top of the stack, and it takes the brunt of Calabasas’s heat-dry cycle. When the crown cracks and separates from the stack, water wicks into the smoke chamber and down toward the liner, and summer heat spalls the crown face. We rebuild crowns that have pulled away and repair the joint where they meet the flue tile. This is a masonry job, not a caulk job, and we treat it that way.
Crown Coating
When a crown is sound but showing surface wear, a protective coating can extend its life and keep small cracks from opening further. It’s a different repair from a rebuild, and we’ll tell you which one your crown actually needs. Coating over a crown that’s already separating from the stack just hides the problem. If you’ve been told a coating will fix a structural crack, ask to see the photos.
We also install multi-flue and custom caps for larger chimneys, which come up often in Calabasas’s hillside estates where the original cap never matched the stack. See our full Chimney Cap & Crown page for the full range.

Trusted Brands We Service in Calabasas
We work with a portfolio of professional-grade chimney brands, including HeatShield, Gelco, Olympia Chimney and Famco. These are the materials chimney specialists specify, and we use them where they’re the right fit for the job at hand. We don’t claim to stock parts locally; we order what the job needs and schedule the work around it. That keeps the turnaround reasonable without promising something we can’t deliver. If a crown needs a HeatShield resurfacing or a cap calls for a manufacturer-specific component, we’ll tell you why that product is the right choice before anything gets ordered.
Common Chimney Cap & Crown Problems We See in Calabasas Homes
- Crowns that crack and pull away from the stack. The heat-dry cycle takes a toll: summer heat pulls moisture out of the mortar, and the joint where the crown meets the flue tile opens. That gap lets water into the smoke chamber and liner, and it’s one of the most common things we find on older Calabasas chimneys.
- Oversized or undersized original caps on hillside estates. A cap that doesn’t seal to the crown lets Santa Ana downdrafts reverse the draw and drive soot onto the firebox glass. A stock cap rarely fits these large stacks properly.
- Cracked clay-tile liners in 1960s and 70s ranch homes. Original clay tile cracks with age, and appliances vented into stacks never designed for them push moisture that spalls the crown from the inside. The cap and crown problem is often a symptom of this.
- Caps blown loose by canyon winds. Wind funneling through the canyons can work a poorly mounted cap loose over time. Once a cap shifts, rain and embers get past it, and the fix is usually a properly anchored replacement or a custom cap sealed to the crown.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Calabasas, CA
A typical chimney cap installation in Calabasas runs $250 to $650, depending on flue count and whether it’s a stock or custom unit. Crown repair, where the crown is rebuilt and re-sealed to the stack, typically runs $400 to $1,200. Crown coating is a smaller job, generally $200 to $500. Custom and multi-flue caps for large estate chimneys run higher, often $600 to $1,400 depending on size and materials. What moves the number most is the condition of the crown itself and how many flues the cap has to cover. We give a written estimate that sets the final price, and the estimate is free. Nothing gets recommended without camera evidence you can see on-screen.
We Also Serve Cities Near Calabasas
We work across the west valley as well as Calabasas. If you’re just over the hill in Hidden Hills, Woodland Hills or Bell Canyon, or you’re in West Hills where we’re based, the same cap and crown work applies. Wind patterns and housing stock shift a little between towns, and we adjust for that. Call (855) 337-1817 and we’ll book you into the next opening.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Calabasas
Wind-driven downdrafts are reversing your chimney’s draw. In hillside neighborhoods off Mulholland and Valmar, the Santa Ana wind pushes down the stack and drives soot onto the firebox glass in a single evening. Out-of-area sweepers often misdiagnose this as a blocked flue and try to sell a full reline. The real fix is usually cap and crown geometry: a properly sized cap sealed to the crown restores the draft. Call (855) 337-1817 for a free estimate and we’ll show you the camera evidence first.
Not if the crown has pulled away from the stack. A coating is a surface repair; a crown that’s separating needs to be rebuilt and re-sealed to the flue tile, or water keeps getting in. On the liner, we run a Level 2 camera inspection and show you the cracked tile on-screen before recommending anything. Sometimes a HeatShield resurfacing fixes it without a full replacement; sometimes it doesn’t. You’ll see which before you decide. Call (855) 337-1817 for a free estimate.
Usually yes, when the stack is oversized or carries multiple flues. Stock caps rarely seal properly to a large estate chimney, and a loose cap lets Santa Ana downdrafts reverse the draw and lets embers escape. A custom cap sealed to the crown is the better fit. We measure the stack and build to it. Call (855) 337-1817 to book an estimate.
You see the camera evidence before anyone recommends work. We run a Level 2 inspection, show you the cracked crown, the loose cap or the cracked tile on-screen, and explain what can safely wait. If your crown is sound and a coating is enough, we’ll tell you that. If it can wait until next season, we’ll say so. Call (855) 337-1817 for a free estimate.
Because the damage here happens whether or not you light a fire. Calabasas sits in a semi-arid inland valley where summer heat bakes the hillsides and the firebox sits unused, but that heat-dry cycle still cracks crowns and spalls mortar. Winter rain then wicks into any gap that’s opened. Throw in the canyon winds working a cap loose, and a chimney can go from fine to failing without a single fire. Call (855) 337-1817 and we’ll check it before the next burn season.
Protect the Flue, Protect the Home
A clean chimney is the starting point, not the finish line. In Calabasas, where Santa Ana downdrafts, wildfire exposure and aging clay-tile flues turn cap and crown work into a draft-and-ember problem, nothing should get recommended without camera evidence you can see for yourself. Whether you need a crown rebuilt, a custom cap sealed to the stack, or just an honest look at whether the work can wait, we’re here to diagnose it correctly the first time. Call (855) 337-1817 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. From annual sweep to full liner restoration, one company carries the job.
Written by the team at Chimney Sweep West Hills.