Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for West Hills Homeowners
Your fireplace should be the part of the house you don’t think about until you strike a match. When the damper sticks, the firebox cracks, or the pilot on your gas insert won’t hold, it becomes the thing you think about every cold evening. Fireplace repair in West Hills is what we do, and we do it with the same professional-grade materials and approach chimney technicians specify for the rest of the flue system. Our technicians have up to 9 years of experience diagnosing what’s actually wrong before anyone touches a tool, and that matters most with brick and mortar that don’t forgive guesswork.
A clean chimney is the starting point, not the finish line. We inspect, sweep, repair the fireplace, and handle cap and crown work under one company, so a diagnosis turns into a fix without a handoff to someone else. Same-day appointments are often possible. Call (855) 337-1817. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Fireplace Repair Service Includes
Fireplace problems rarely stay in one place. A crack in the firebox lets heat into the wrong space, a worn damper lets conditioned air out, and a dirty flue makes both worse. Here’s what each part of the repair actually involves.
Gas Fireplace Repair
Gas fireplaces and gas logs produce a flame without wood, and their problems usually show up as a weak flame, a delayed light, soot on the logs, or a smell that shouldn’t be there. When the burn is uneven or the flame turns yellow where it used to be blue, that’s the point to stop using it and have it looked at, since a gas appliance that isn’t burning cleanly vents differently than it should. We diagnose the burner, the pilot and thermocouple assembly, the gas valve, and the venting path, then repair what’s failing rather than replacing the whole unit when a component is the issue.

Wood Burning Fireplace Repair
A wood-burning fireplace takes more abuse than its gas cousins: repeated heat cycles, creosote, and moisture all act on the firebox and flue over time. You need repair when you see cracked or spalled firebrick, loose mortar joints, a smoky draft that pushes into the room, or a fire that’s harder to start than it used to be. We evaluate the firebox, the damper, the smoke chamber and the flue as one system, then repair the mortar and brick with refractory materials rated for the heat, so the fix holds through the next several burning seasons.

Fireplace Insert Service
An insert is a heating appliance set into your existing fireplace, and it needs service as its own unit rather than as part of the fireplace around it. When an insert smokes, runs too cool, or the blower starts rattling, the fix usually sits in the flue connection, the gasket seals, or the liner above it. We pull the insert to inspect behind and above it, clean the liner it vents through, and check the seals and connections before putting it back, so the appliance and the chimney work as one piece again.

Damper Repair
The damper is the metal plate that opens and closes the flue, and it’s the most-used moving part in the whole fireplace. It needs repair when it sticks halfway, won’t seal, drops open on its own, or the handle rotates with no resistance because the linkage has failed. A damper that won’t close lets heated air escape up the flue all winter and lets outside air in all summer; one that won’t open properly sends smoke into the room. We repair or replace the damper plate, frame, and linkage so the seal closes flat again.
Firebox Repair
The firebox is the chamber the fire sits in, and it’s built from firebrick and refractory mortar designed to take direct flame. Cracks, missing brick faces, and crumbling mortar are the signs it needs repair, and they matter because a compromised firebox lets heat and combustion gases reach framing and masonry never meant to see them. We rebuild damaged firebox panels and joints with refractory material matched to the original construction, restoring the barrier layer rather than cosmetically patching it.
Pilot Light Repair
A pilot light that won’t stay lit is usually a thermocouple, thermopile, or gas valve problem, not a mystery. You need repair when the pilot goes out shortly after you release the knob, when the flame is weak or yellow, or when the main burner won’t come on at all. We test the pilot assembly and its safety shutoff, replace the failed component, and confirm the burner lights smoothly before we leave, since a pilot that keeps dropping out is a sign the safety circuit is doing its job and something upstream needs attention.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with the materials chimney professionals specify, and that knowledge runs across several brands. HeatShield is what we turn to for flue liner restoration when a deteriorating liner can be resurfaced rather than torn out, a technique that saves the masonry around it. Gelco products are part of our repair toolkit for sealing and restoring the flue system. Olympia Chimney components and Famco products round out the flexible liner and venting work that often sits behind a fireplace repair, so a reline and a firebox rebuild can be planned together instead of as two separate jobs.
What this means for you is that a damaged flue connection, an aging liner, or a failing vent doesn’t automatically mean demolition. Whether your fireplace or insert is made by one of these brands or any other make, we can help, and we’ll tell you honestly when a repair is the right answer and when it’s not.
Signs You Need Fireplace Repair Right Now
Some symptoms can wait a few weeks. Others shouldn’t. These are the ones that tell us to get the fireplace looked at before the next fire.
- Smoke rolling into the room. If smoke backs up instead of drafting up the flue, the problem is usually the damper, the smoke chamber, or a blocked flue. It’s worth stopping use until the cause is found, since that draft failure is what sends combustion gases the wrong direction.
- Cracks or gaps in the firebox. Hairline cracks widen with every heat cycle, and once heat can reach the masonry behind the firebrick, the damage spreads into framing. This is the repair that’s cheapest early and most expensive late.
- A sticking or loose damper. A damper that won’t seal or won’t open fully is a small fix that becomes a bigger one when the plate rusts into place. Repair restores the seal and the draft together.
- A pilot that keeps going out. On a gas unit, a pilot that won’t hold is the safety system telling you a component has failed. Stop using the fireplace until it’s checked, since unburned gas and poor combustion both start here.
- Soot, staining, or a persistent smell. Black streaks above the opening, soot on the surround, or a smoky odor even when the fireplace is cold points to a venting or combustion problem. It usually means the flue needs a sweep and the fireplace needs an inspection before anything else is decided.
Our Fireplace Repair Process – Step by Step
Diagnosed correctly the first time is the whole point. Here’s how a repair visit runs, from the first phone call to the final check.
- 1
We start with a full inspection. We look at the fireplace, the firebox, the damper, the smoke chamber, and the flue, and we run a camera through the venting where we need to see behind the walls. You get the photo report so you’re looking at the same evidence we are.
- 2
We sweep and clean before we judge. Creosote and soot hide problems and mimic others, so a proper cleaning comes first. This is also where we check the chimney cap and crown, since water coming in from the top is behind a good share of the damage we find lower down.
- 3
We diagnose and explain. You get a written scope that names the failed component and the repair, not a vague recommendation to replace everything. If a liner can be restored with HeatShield rather than replaced, we’ll say so; if it can’t, we’ll show you why.
- 4
We do the repair with rated materials. Refractory mortar for firebox work, correct-grade liner components, and the brands we know hold up. Repair is scoped to what the inspection actually found, so nothing gets rebuilt that didn’t need it.
- 5
We test the fireplace and document it. Burn test on a gas unit, draft check on a wood-burning one, and a final look at the firebox and damper after the work is done. You get the photos and the written summary, and we tell you plainly what can safely wait until next season.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in West Hills?
The honest answer is that it depends on what fails, but the range is tighter than most homeowners expect. A typical damper repair in West Hills runs $150 to $450 depending on whether the plate, the frame, or the linkage needs replacing. Pilot light and thermocouple repair usually lands in the $120 to $350 range. Firebox repair with refractory materials is the wide one, from around $400 for repointing and cracks up to $2,500 or more when panels need rebuilding. Insert servicing, including pulling and reseating the unit, typically runs $250 to $600.
What moves the number: how much firebrick is damaged, whether the flue is also cracked, the age of the appliance, and whether replacement parts are standard. A repair quoted without an inspection isn’t a price, it’s a guess. The way to avoid overpaying is to make sure the estimate is itemized and grounded in camera evidence you’ve seen yourself.
Every estimate is free, and the written estimate sets the final price. We don’t quote a number before we’ve looked at the fireplace, and we’ll tell you when a repair can wait, since not every crack needs to be fixed this month.
Fireplace Repair Near West Hills – Our Service Area
We serve homeowners across West Hills and the surrounding valley communities, including Canoga Park, Woodland Hills, Winnetka, Reseda, Chatsworth, Porter Ranch, Bell Canyon, Calabasas, Agoura Hills, Hidden Hills, Santa Susana, and Simi Valley. Response times depend on where you are in the valley and how full the schedule is, and we’ll give you a realistic window when you call rather than a promise we can’t keep. One company handles the sweep, the fireplace repair, and the chimney repair, so you’re not the middleman between two contractors.
Serving West Hills, CA – Our Local Coverage Area
We serve West Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in West Hills
Fireplace repair is fixing the parts of the fireplace that heat, moisture, or age have damaged: the firebox and its refractory brick, the damper, the gas burner and pilot assembly, and the insert’s seals and connections. It’s different from a sweep, which removes creosote, and from chimney repair, which handles the flue and structure above. Most repair jobs start with a sweep and inspection so the diagnosis is based on what’s actually inside the fireplace. Call (855) 337-1817 for an exact quote. Estimates are free.
Most single-component repairs, like a damper or a pilot assembly, take a couple of hours. Firebox rebuilds and insert service run longer, often a full visit, because the materials need to cure or the appliance has to come out and go back in. We’ll give you a time estimate with the written quote so you can plan the day. If the repair is more than a one-visit job, we’ll tell you before we start.
Typical fireplace repair in West Hills ranges from about $120 for a pilot light fix to $2,500 or more for a full firebox rebuild with refractory materials, with most single-part repairs falling between $150 and $600. The exact price depends on what failed, how much firebrick is damaged, and whether the flue needs work too. Every estimate is free and written, and the written estimate sets the final price. Call (855) 337-1817 for an exact quote.
Yes. We’re set up to work with HeatShield liner restoration and Olympia Chimney components, along with Gelco and Famco products, which covers most of what a fireplace repair touches above the firebox. That matters when a repair turns out to involve the flue connection or the liner, since the fireplace and the chimney have to be planned as one job. You don’t need a second contractor for the chimney side.
Same-day appointments are often available, and we do our best to fit a fireplace repair in the same day you call when the schedule allows. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 337-1817 to get on the schedule.
We stand behind our workmanship on the repairs we complete, and any manufacturer warranty on the materials we install stays with the product itself. Because we work with professional-grade brands like HeatShield and Olympia Chimney, the repair is built to the same standard the material was made for. If something isn’t right after the visit, call us and we’ll come back and look. Ask about the specifics on your written estimate before work starts.
Clear the hearth and a few feet in front of the fireplace so the technician has room to work, and remove anything valuable or fragile from the mantel and surround. Don’t burn in the fireplace for at least 24 hours before the visit, since a hot firebox can’t be inspected safely and soot stirs up more than it needs to. If you have the fireplace manual or the insert’s model information, have it handy, and make a note of the symptoms you’ve noticed so we can check them directly.
Schedule Your Fireplace Repair Service in West Hills Today
A fireplace repaired early costs far less than a firebox rebuilt late, and the difference is what gets caught on the inspection. Call (855) 337-1817 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We sweep first, diagnose with camera evidence you can see, and repair with the materials chimney professionals specify. No-obligation estimate, and an honest answer on what can wait. Also see our fireplace repair page for nearby homeowners, and our guides to fireplace repair in Hidden Hills and chimney sweep services.
Written by the team at Chimney Sweep West Hills.